Back Bone Pain


This report covers the real causes of back bone pain and other back pains and cures.

back bone pain
Basic Anatomy of the Vertebral Column


The vertebral column, or spine, is a complex system of bones, inter vertebral discs, ligaments, muscles and nerves, designed to fulfill many seemingly incompatible functions. It must offer support to the body (to hold us upright) whilst allowing a large range of movement in many directions. The spine also functions to protect the delicate spinal cord that carries nerves to every part of our bodies, as well as acting as a shock absorber to decrease the forces transmitted to the brain when walking, running, jumping etc.


The bones of the spine – the vertebrae – are stacked one upon another, separated by discs, in such a way that three normal curves are maintained – slight inward curves at the neck (cervical) and lower back (lumbar) areas, and an outward curve in the chest (thoracic) area. These curves and discs are mainly responsible for shock absorption. Each vertebra is attached to the next by a complex of three joints. Any imperfection of any of these causes back bone pain Visit our ‘Back Pain Relief Guide‘ for more information…


A number of ligaments bind these bones and discs together. They surround the joints of the spine, some being short and traveling the distance of only one or two vertebrae, others being longer, traveling over several vertebrae to the entire length of the spine. These ligaments are partially responsible for the support function of the spine, preventing the vertebrae from slipping “out of place”. If your spine slips out of place this is what causes back bone pain.


Muscles surround and are attached to the vertebrae to provide movement, or add to stability. In general, muscles perform one of these two functions. Some produce movement of joints – these muscles are typically long and thin, can act quickly, producing high tension over short periods of time. If you stress one of these muscles it will result in back bone pain or spinal discomfort. Other muscles are designed specifically to provide stability across joints – they are generally shorter and thicker, supplying low tension for extended periods of time. They produce small movements constantly, and “fine-tune” the position of the joints – these are our postural muscles.

Stability and back bone pain

Stability of each spinal segment – each vertebra and its joints – is essential for back pain-free movement and. Any movement of any part of the spine puts a strain on the spine and its surrounding structures which results in back bone pain. Any movement of other body parts also impacts upon the spine, causing stress to the structures of the spine. This stress results in spinal back bone pain.

Back Bone Pain-All Things Are Connected

The legs are attached to the spine via the pelvis, with leg movements causing movement of the pelvis and therefore of the spine ( “the knee bone’s connected to the thighbone” – yep, it’s true – all the bones in the body are ultimately connected … to the spine!) Similarly, the arms are connected to the torso via the clavicle (collarbone) and scapula (shoulder blade). Therefore movement of the arms ultimately puts stress on the spine. This is why stability of the spine is so important – every movement you make is putting stress on your spine, and if the spine is not being held stable, the spinal joints will have more movement imposed upon them, putting more stress on the joints and surrounding structures. This is why your spine is the most important part of your body! Not only is every part of your body dependent on it, but if it gets abused or out of alignment you will experience a severe amount of back bone pain.

Now we’re getting to the really interesting parts.

Three Elements for Stability of the Spine

This necessary stability or support of the spine is provided at three levels, or sub-systems.

1. Passive.

The passive sub-system provides stability via the bones, joints and ligaments. The design of the passive system of the spine allows approximately 2 to 3 kilograms of pressure to be managed. (When you consider that the average person’s head weighs 5kg, it shows how important the second and third subsystems are in just holding yourself upright).

2. Active.

The active sub-system refers to the support and stability given by postural muscles in the area, specifically designed for this task.

3. Neural Control.

The brain controls the muscles of the active sub-system through the neural control sub-system in response to feedback from structures surrounding the spine. This enables the provision of stability when it is needed.

These three sub-systems work together to provide optimum stability of the spine when it is needed. Any upset to any sub-system will lead to decreased stability, resulting in increased stress being placed on the spine therefore creating back bone pain and spinal malfunction.

But what we have discovered is that the third element – Neural Control – is the missing link from almost all treatments currently available. Most treatments concentrate on re-aligning the vertebra, strengthening muscles, restoring function to ligaments, etc.

Very few make any attempt to ensure the nerve paths to injured muscles are functioning. And even if they were aware of this critical factor, most practitioners have absolutely no idea how to get these nerve paths functioning again. This is a crucial part of natural spinal function. It is like a fine tuned machine. If any one of these three are not operating properly it will cause back bone pain.


A vital element for the correct and optimum functioning of these subsystems is correct posture. Ideal posture should maintain the three natural curves of the spine in any body position – sitting, standing and lying down. Any decrease or increase of these curves will stress the whole spinal system. (That’s probably why lying on your back for any length of time causes stiffness – the natural curves have been flattened and distorted, so when we finally get up, we feel like stretching and moving in funny ways just to get rid of this stiffness.)

When our posture is incorrect for any length of time, the ligaments surrounding the joints will either be over-stretched or lax, joints will be forced into poor positions, the muscles surrounding the area (whether movement muscles or postural muscles) will be working from a position that is not optimum for force generation, and will therefore tire more easily. And the neural control system will also not work as effectively. All this adds up to an increase in stress and strain on the spine.

The Better Back Technique exercises produce a very welcome side-effect: your posture will automatically improve out of sight. For more back pain relief visit our home page at Back Pain Relief Guide

Now to answer today’s question: What Causes Back Pain?

Back strains or injuries are initially caused by an external stress or load that is greater than the spine’s structural capacity. Most injuries occur during a sudden unprotected or awkward movement. back pain initially can be caused by injury to, or incorrect functioning of any of the components of the spine – bone, joints, ligaments, and muscle – or any change in alignment of the whole vertebral column. On the other hand, back pain after injuries have settled is more likely to be a result of the dysfunction (poor performance) of one or more of the three components I spoke about earlier – 1. Passive: bones, joints & ligaments; 2. Active: movement & postural muscles; and 3. Neural control: nerve paths to the muscles.This will lead to back bone pain and require medical treatment.

Folk Found This Page By Searching For:

  • back bone
  • vertebral column
  • back bone pain
  • back bones
  • spinal column
  • omurga

Comments are closed.